S 3003
Spider Fitting Laser Cut Stainless Steel AISI 316 for Point Fixed Architectural Glass - Technical evaluation
AVANTAGES
Small space requirement
- Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc.
- Different models available
- Tested and certified by technical evaluation (test report)
- Stainless steel 316
- Small space requirement
- Tailor-made solution: choice of material, thickness and model
- Fastener thickness: 8mm, 10mm, 12mm, 15mm
- Compatible with our omega range (easy adjustment on the structure)
Certificates
* Contact us for more information on certifications in your country
Structural glass facade
Architectural glass fittings
S 3003 cut steel or stainless steel spider
Made acccording to your project
Saddev offers this spider, close to a tailor-made solution: select your model, color and thickness.
Indeed, various models are available: one arm (90° and 180°), 2 arms (90° and 180°), 3 and 4 arms. You have the choice of your spider’s thickness : 8,10, 12 or 15mm.
But you can also decide the material you’d like to use: 316L stainless steel, dull polished GR220 (standard) or painted steel.
Distance hole to hole: 204 mm.
This product has been tested and validated in many country around the world . Please contact our technical department for details of these certifications according to your country and project.
Mounting
Suggested mounting instruction
The drilling diameter for the pins is 6 mm. Do not drill the holes for the pins in your structure before mounting the spiders. To fix the spider on your structure the “Omega” ( see accessories ) is highly reco mmended to adjust the spider’s position. The fixing of the spider is done with a M16 or a M12 bolt ( out of Sadev supply ).
This bolt shall not be fitted into a vertical slotted holes due to the risk of slipping ( under the weight ), the pins are not designed to hold any permanent loads ( cf. specification sheet ). The spider has to be positioned on a flat support. The slotted holes Ø 17×24 mm and free holes Ø 24 mm in the spider are not to be used to adjust the spider ! They are needed to absorb the manufacturing tolerances and the thermal deformation of the glass and of the structure. The spiders are standardized for M14 fittings ( FXR, FXV ) ; other diameters are available on request.
SADEV reco mmends using thread locking compound, except in case of specific mounting constraints.
Performances
Related articles
