R 1005
Swivel fitting - rotule - for structural bolted glass - Non-Flush with Flang eand Waterproof Gusset - ø70 mm
AVANTAGES
Specially designed for awnings and suspended canopies
- Swivel mounting: for effective glass retention
- Application: suspended glass roof
- Silicon cover included
- Stainless steel AISI 316
Certificates
* Contact us for more information on certifications in your country
Fixation
Swivel fittingGlass tchickness
Tailor-madeDrilling type
CylindricalInstallation type
From insideType of glass
MonolithicLaminated
Fastening glass piece
Swivel fitting : for an efficient support of the glass
Since the fixing piece plays a major role in the maintenance of the glass, Sadev provides you her know-how to bring you the most adapted pieces for your projects. To be able to answer quickly and at the best cost, we propose you fittings with standard dimensions available in stock.
The swivel fitting recovers the loads and deformations of the glass, so as there is no stress in the glass panels. So, the glass thickness can be reduced.
R1005 Swivel fitting
The R1005 swivel head is a mounting for glass of Ø70 diameter, with flange and integrated silicone sealing bellows.
This product is recommended for suspended glass roofs. Silicon cover included. Cylindrical drilling. Standard axle: M14 or M16, 65mm long.
Glass
Performances
Suggested mounting instruction
Insert parts N° 1/2, 9, 4, and 3 into the glass hole.
Mount the second contact washer N° 4 and nut N° 5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using SADEV tools ref. 097581160 and ref. CLE-DYN-072031.
Ensure that the silicone cover N° 10 is secured and not stretched too tightly or it may come loose.
Thread on nut N° 6 and apply washer N° 7.
Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 11. Tighten to 60 Nm or ( 45 ft-lb ) using a 22 mm wrench.
SADEV recommends using thread locking compound whenever possible.
Related articles
